Best Pond Pump Information 2021

Pumps keep the water in your pond healthy. They help evenly spread nutrients in the water to fish, plants and other aquatic life. Running water prevents stagnation and cuts down on algae and mosquitoes. Keeping the water moving ensures that oxygen levels are distributed throughout the pond. Pumps also provide power for a pond’s water features, like waterfalls and fountains.

This guide will help you learn about the best pond pumps for your garden.

The best water pumps for your pond and its fountain or waterfall come in variety of types and styles. They include submersible, external, magnetic drive and direct drive. Each of these water garden pumps offers its own advantages.

Submersible Pumps: These pumps are designed to work while wholly submerged in water. Typically, they are installed in the deepest part of the pond. Submersible pumps can be placed either directly into your pond or in a skimmer box or pond vault.

Easy to install.
Work well in environments that capitalize on a natural setting.
No need to camouflage the pump.
Run very quietly so there’s no distracting noise in your garden.
Submersible pumps can be used to drain your pond, if needed.
Range in pumping size from 50 to 5,000 gallons per hour.
Can generate higher energy costs than other pump types.
For smaller ponds, submersible pumps are generally more economical.

Tip: Some submersible pumps use oil to operate. If the pump seal breaks and leaks harmful oil coolant into the water, fish can be hurt or killed. If you have fish or other aquatic life in your pond, you’ll want to look for a submersible model that does not use oil.

External Pumps: External pumps can move a high volume of water, yet usually have lower energy costs than submersible pumps. They are not as quiet as submersible pumps. They should be placed in a dry location near your pond. External pumps are a lot more complicated to install. However, they are generally more reliable.

Available as self-priming pumps able to draw their own water.
Can be loud, disturbing the quiet of your garden.
Work well for larger ponds that are 1,000 gallons or more.
Offer long-lasting performance and easy repair.
Require less routine maintenance than submersible pumps.

Tip: Pumps that are not self-priming can burn out a motor if the power shuts off momentarily and then comes back on. Protect against this by installing a check valve.

Magnetic Drive: In a magnetic-drive pump, an electrical charge creates a magnetic field that causes the magnet on the impeller to rotate and pump water. Since they have no seals to wear out, they require little maintenance. Occasionally, you will need to clean the impeller and its chamber for the most efficient operation.

Completely sealed. Magnetic-drive pumps do not require lubrication.
Because they don’t contain oil, magnetic-drive pumps are safer for ponds with fish, since oil leaks don’t occur.
Don’t generate high head heights. Magnetic-drive pumps are unable to lift pond water vertically, which you might need to supply water to a fountain. They are not the best water pumps for fountains.
Work best in cleaner environments with little or no debris.
Highly efficient and cost-effective.

Direct Drive: Direct-drive pumps have an enclosed motor that is powered by electricity, which turns the impeller shaft.

Achieve significant head height, so they are able to move water vertically. They are among the best water pumps for fountains and waterfalls.
Typically more expensive to operate.
Push water rather than pulling it.
Not easily repaired.

Tip: Some models seal the motor in an oil-filled shell with seals around the cord and impeller shaft. These are risky to use if you have a pond stocked with fish. There is an ever-present danger of water contamination if a leak occurs. Many newer pumps, however, feature alternative lubrication that is safe for fish. Look for oil-free models if you have fish or other aquatic life in your pond.

Pond Pump Calculations

Figuring out the correct pump size depends upon the how big your pond is. Other factors include whether or not the pump is being used for filtration, re-circulation or water features. Another factor is the number of fish and plants your pond contains. Larger fish populations have greater air requirements.

A good rule of thumb is that pumps should be able to pump out about half the pond volume every hour. For example, a pump that moves 500 gallons per hour would be appropriate for a 1,000 gallon pond.

You don’t have to refer to a fountain pump size chart to figure out the best water pumps for your garden. With a few measurements and calculations, you can determine the size pump you’ll need.

Flow rate for filtration

Filtration flow rate in gallons per hour (gph) = 0.5 x pond volume (gallons)

Flow rate for fountains

For every inch of stream width at the top of the fountain, you need 100 gph at the height you’re pumping

Flow rate for waterfalls

Light flow = 50 gph x waterfall width (in.)
Average flow = 100 gph x waterfall width (in.)
Strong flow = 200 gph x waterfalls width (in.)

Pond volume

Pond volume (gallons) = 7.5 x average width (ft.) x average length (ft.) x average depth (ft.)

Pond Pump Features

In-line, utility, solids and axial pumps are just a few of the many varieties of water garden pumps that are available.

In-line Pumps: These pumps draw water through an inlet that connects to a hose so you can pull water from a remote location. All external pumps are in-line pumps.
Utility Pumps: Utility pumps draw water through openings that screen out debris. When placing one into a pond, use a pump sock or other enclosure to reduce the amount of cleaning needed. If you use a pump sock, be aware that sock-like screening can cause a dry pump situation.
Solids Pumps: These pumps draw water through a large opening and pump small debris through without clogging. For this reason, they can be placed into a pond without prefilters. This pump type is not safe for ponds with fish, frogs or other aquatic animals, however.
Axial Pumps: These special utility pumps are designed for high-flow, low-pressure pond environments. Because they are big, they require piping that is large in diameter.
Solar Pumps: Solar-powered pumps perform well in climates with lots of sunshine. They can cost less to operate since they don’t require an outdoor electrical outlet. Solar pumps also work well if your fountain is located far from the power supply. However, flow rate is minimal compared to typical voltage.
Heavy-Duty Pumps: Heavy-duty pumps are typically made of stainless steel and are more costly. However, they offer greater energy efficiency and last longer.

You’ll need to consider several factors when deciding between the best water pumps for your garden pond. A pump should be able to handle the size of your pond and support your water features. It also needs to be compatible with any fish or plants you may have.

Cincinnati, Ohio Based Waterfall Contractors

December 31, 2022/in Meyer Aquascapes/by Aquascaping101

What is a Waterfall Contractor?

Waterfall Contractor – That’s us! If you’re looking to add a waterfall to your home or business, you’ll need to hire a professional who specializes in this type of work. But what is a waterfall contractor? In short, these are professionals who design and install waterfalls. This can include anything from small tabletop fountains to large-scale cascades. No matter the size or scope of your project, though, working with a qualified contractor will ensure that your waterfall is installed correctly and looks gorgeous for years to come!

A waterfall contractor is a professional who helps to design and install waterfalls for residential and commercial properties.

A waterfall contractor is a person who can turn your ideas into reality with the help of a little water and creativity. Hiring a professional waterfall builder brings many benefits, such as assurance that the job will be done properly and safely. With experience in design and installation, a good contractor offers an expertise in selecting the right materials for building long-lasting fixtures, vibrant colors for eye-catching effects, and even detailed sculptures to really bring an area alive. With these skills, a waterfall contractor can do more than just give your outdoor living space a unique touch—they can also contribute to providing reduction of noise and providing year-round beauty in all types of weather conditions.

Waterfalls can be made from a variety of materials, including stone, concrete, glass, metal, and plastic.

Waterfalls provide an element of visual and sound beauty to both residential and commercial properties. For years, they have been constructed using natural stone, generating a cool and soothing atmosphere that is still popular today. Recently, however, some architects and designers have been experimenting with artificial materials such as concrete, glass, metal, and plastic to construct these tranquil works of art. While the resulting waterfalls may not have the same distinct look of quarried stone or river rocks, their innovative designs can be just as captivating in a modern or rustic setting.

The size of the waterfall will vary depending on the space available and the client’s preferences.

The size of a waterfall is an important factor in creating a beautiful and tranquil outdoor space. The desired size of the waterfall depends on a number of variables, such as the square footage of the outdoor area, the client’s budget and the design parameters they have set forth. Ultimately, it comes down to what best meets the client’s desires while staying within their given space constraints and overall project budget. With a proper design plan, even small spaces can be transformed into elegant oases, with impressive waterfalls becoming dramatic focal points and providing unforgettable experiences for visitors.

Waterfalls can add value to a property by increasing its aesthetic appeal and providing a calming environment.

Adding a waterfall to a property can have many advantages. Not only do they enhance the aesthetic beauty of an area, they also create a calming atmosphere that can be beneficial for relaxation and stress relief. The sound and sight of rushing water can be therapeutic, helping soothe away worries and bring moments of tranquility. With careful design and solid planning, waterfalls can even serve an important ecological purpose by providing a habitat for many species of birds, bats, more amphibians, and other wildlife. The addition of beautiful features like cascading streams or ponds can also generously increase the value of any property.

If you’re thinking about adding a waterfall to your property, be sure to consult with a professional contractor first. Waterfalls can be made from a variety of materials and come in all shapes and sizes, so it’s important to find one that will complement your space and meet your budget. With proper installation, waterfalls can add significant value to your home or business by increasing its curb appeal and creating a tranquil atmosphere.

Check out our store for all your water gardening needs! Aquascape products are Aquascape Inc. Certified.

Thanks for reading at Meyer Aquascapes! We hope you’ve enjoyed our post on garden pond design. Please leave a comment below if you liked it or have any questions. We’d love to hear from you! Thanks for stopping by!