IonGen™ G2 Probe Holder
Straps onto any pipe from 1-4 inches in diameter. Works great attached to the AquascapePRO® Check Valve.
- Provides installation of G2 Probe without Flow Chamber
- Can be used in a filter, such as a Skimmer or Pondless® Waterfall Vault
- Straps onto any pipe from 1 – 4 inches in diameter
- Works great attached to Aquascape Check Valves
About the IonGen Components:
Control Panel – Touch pads allow the user to adjust the level of copper ions produced based on the condition of the water feature. A microprocessor in the Control Panel sends a signal to the Probe causing the outermost metal atoms of the Probe’s bars to lose an electron creating a positive ion. The positive ion attempts to flow from one bar to the other and is swept away by the flowing water and dispersing it into the water feature. It is recommended that the monitor panel be mounted.
The Probe – Copper/Metal bars are activated by the control panel and slowly dissolve into the water. The Probe can be installed directly in the skimmer using the Flow Chamber included with the system. Should be changed every year in the spring. If IonGen is not working check the probe as you may need to scrape the oxidation build up on the prongs or replace it if it is wore down.
Installation of the Probe – The Probe can also be installed without the flow chamber by hanging it directly into a filter with good water flow, such as the skimmer. You might like to use the IonGen G2 Probe Holder which allows installation without Flow Chamber. Straps onto any pipe from 1 to 4 inches in diameter and can be attach to the Check Valve. This allows you to have good water flow for the efficient use of the IonGen.. The Probe is replaceable and will last typically about one season, depending on usage. The Control Panel will read 00 when the Probe is completely exhausted or if there is a fault in the operation of the system.